Giỏ hàng

CO gas sensor Fibaro

Thương hiệu: Fibaro
Loại: Sensor
Giá: Liên hệ0₫ (chưa bao gồm VAT)
  • CO sensor Fibaro
  • Products in the Apple HomeKit system
  • Compact, modern design, easy to install and uses replaceable batteries
  • Sensitive sensor, connected by Bluetooth, Wifi
  • Using high-quality, heat-insulating plastic
  • Sensitive sensor, large use area
  • Automatic update by Wifi
  • European Standar

Màu sắc

Văn Phòng Công Ty

MIỄN PHÍ VẬN CHUYỂN
THANH TOÁN ĐẢM BẢO
HỖ TRỢ 24/7
HOÀN TRẢ MIỄN PHÍ

Fresh life without CO

The Fibaro CO gas sensor is the product that will protect you from “ Invisible Attackers” . This is also a device that supports using Apple ormeKit. According to studies, more than 60% of home accidents are caused by fires, gas leaks and carbon monoxide asphyxiation Because they are so hard to spot, most people don't even know they exist. However, if not handled promptly, it can be extremely dangerous.

Special Features of the Fibaro . CO Gas Sensor

Sensing ability

The Carbon Fibaro gas sensor has 3 warning levels with 3 different colors: Green (safe) , Yellow (slightly high but not dangerous) , Red (Danger) . The pision of levels will avoid the case of fake notifications affecting everyone's life. When CO levels are high, you should open the doors to reduce the amount of gas or find an emitter to remove. As for the red level, you should consider getting out of that area as soon as possible.

Built-in temperature measurement, instant fire detection

In addition to the main function of measuring CO concentration, the device also combines temperature measurement. With this function, the Fibaro CO Gas Sensor will increase the ability to identify fires even without smoke. This is the main reason why many families have installed fire alarms but still do not receive notifications. So be careful about the products of unknown origin on the market.

Connect directly to the phone, control with the Home or Fibaro . app

When a fire occurs or an abnormally high concentration of smoke (CO) occurs, the sensor will send a notification to your phone and the device's alarm will also be activated to evacuate all members in the area.

Not only that, all data on CO concentration in the air is also saved for evaluation and comparison when there is a continuous change. In addition, the CO sensor can link with other devices in the same Apple HomeKit system, helping you control all activities in the house easily.

Convenient wireless technology, does not take too much time for installation. Use anywhere in your home with a battery that can last up to 2 years.

Keeping your family safe is never enough. Choose for yourself the fresh and safe air.

  • Power supply: DC 3.0V . battery
  • Battery type: CR123A
  • Life in good condition: 8 years 8
  • CO concentration measurement range: 0 - 450 ppm
  • Measurement accuracy: ±10ppm / ±5%
  • Alarm time: 50ppm 60-90 minutes; 100ppm 10-40 minutes; 300ppm <1.5 minutes
  • Siren alarm sound: 85 dBA at 3 meters (10 feet)
  • Operating Temperature: 0 - 50°C (32-122°F)
  • Operating Humidity: 10-95% RH non-condensing
  • Standard: RED 2014/53/EU; RoHS 2011/65/EU; EN 50291-1: 2010
  • Connectivity: Bluetooth® Low Energy
  • Radio frequency: 2.4 GHz
  • Radio transmit power: up to 5.5 dBm (EIRP)
  •  Range: up to 50m
  • Dimensions (diameter x height): 65 x 28 mm (2.56 x 1.1 inches)
  • Warning: Improper use of batteries may result in explosion. Dispose of batteries properly, complying with environmental protection rules.

None

Sản phẩm đã xem

-%
0₫ 0₫